IBM 1269-3S2, Инструкция по установке, обслуживанию и эксплуатации

Страница: 59 / 77

Troubleshooting
43
Caution Handle the module carefully and avoid damaging the connector pins. Do not install the module if any pins
appear to be bent.
2 With the PSU handle ( Figure 4–4 ) in the open position, slide the module into the enclosure.
Important install both Power Supply/Cooling modules in an “upside down” orientation.
3 Cam the module home by manually closing the PSU handle ( Figure 4–3 ). A click should be heard as the
handle latches engage ( Figure 4–3 ).
4 Connect the power supply cord to the power source and switch the power supply ON.
Note The alarm will sound until the new Power Supply/Cooling module is operating correctly.
.
Figure 4–3 Removing/Inserting a PSU/Cooling Module
Figure 4–4 AC PSU/Cooling Module Handle in Open Position (reverse orientation at installation)