IBM 10/100 Mbps Ethernet PCI Adapter II, Инструкция по установке и использованию

Страница: 15 / 30

Chapter 3. Installing the Device Driver
This chapter provides instructions for installing the device driver for the 10/100 Mbps
Ethernet PCI Adapter II on an AIX system. The device driver is provided in AIX and
other operating systems that support the adapter. It is also available on separate media.
To determine whether the device driver for the 10/100 Mbps Ethernet PCI Adapter II is
already installed, type the following at the system prompt:
lslpp -l | grep devices.pci.1410ff01
Press Enter. If the device driver is already installed, you can proceed to install the
adapter; go to “Chapter 4. Installing the Adapter” on page 7 for instructions. If you must
install the device driver on a system other than AIX, refer to your system documentation
for instructions.
To install the device driver on an AIX system, do the following:
1. At the system prompt, log in as a root user.
2. Insert the device driver media into the appropriate media device.
3. To start SMIT, type the following at the system prompt:
smit devinst
Press Enter. The Install Additional Device Software panel displays. The INPUT
device/directory for software option is highlighted for selection.
4. Press F4 to display a list of input devices from which you can select. The cursor is
already positioned on the input device entry field.
5. Either type the name of the input device in the entry field or select the appropriate
device. Press Enter. The Install Additional Device Software panel displays the
device you selected in the INPUT device/directory for software field. The
SOFTWARE to install option is highlighted.
6. Press F4 to display a list of the device packages you can install.
7. To display a Find dialog box, type:
/
in the field where the cursor is positioned.
8. Type the following device package name:
devices.pci.1410ff01
Press Enter.
9. Press F7 to select the device package name, then press Enter. The Install
Additional Device Software panel displays the completed required fields.
10. Press Enter. The ARE YOU SURE list displays.
11. Press Enter. The COMMAND STATUS panel displays. The term
RUNNING
is
highlighted, indicating that the software is being installed.
5