IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter, Инструкция по установке и использованию

Страница: 13 / 32

Chapter 1. Overview
The 10/100/1000 Base-TX Ethernet PCI-X Adapter and Dual Port 10/100/1000 Base-TX PCI-X Adapter are
high performance, highly integrated, universal Ethernet LAN adapters for PCI-X and PCI systems. The
adapters provide 10/100/1000 Mbps connectivity over 4 pairs of standard CAT-5 cable up to 100 meters.
Both conform to IEEE 802.3ab 1000 Base-T standard. The adapters run in standard PCI-X V1.0a
compliant systems with 32-bit or 64-bit PCI-X Bus Master slots at 66 MHz or 133 MHz, as well as PCI 2.2
compliant systems with 32-bit or 64-bit PCI bus master slots at 33 MHz or 66 MHz.
Both adapters provide the following features:
v Support for 64-bit Direct Bus Mastering on the PCI/PCI-X bus
v Use a shared memory structure in host memory and copy data directly from and to host memory
v
Support Boot ROM
v Operate in 10/100/1000 Base-T modes
v
Support 1000 Mbps throughput on 4 pairs of standard CAT-5 cabling
v Support 100 Mbs and 10 Mbps throughput on 2 pairs of standard CAT-5 and CAT-3 cabling
v
Full-duplex operation
v IEEE 802.3ab 1000 Base-T compliant
v IEEE 802.3u 100 Base-TX compliant
v IEEE 802.3 10 Base-T compliant
v Support Dual address cycle for access to 64-bit addresses
v Support 64-bit addressing for systems with physical memory greater than 4 GB
v Support PCI-X split transactions
v
Two bicolor LED adapter status indicators for link activity and baud rate. See the following illustrations.
v RJ-45 UTP Connector for Category-5 Copper Cabling
v
Surface mount technology (SMT)
10/100/1000 Base-TX Ethernet PCI-X Adapter
ACT / LNK
10=OFF
100=GRN
1000=ORG
1
3
2
1 ACT/LNK LED
2 RJ-45 Connector
3 Link Speed LED
1