IBM High IOPS Adapter Hardware Installation Guide for ioMemory VSL 3.2.2
|
______
_
_
13
4.
a.
b.
5.
6.
Remove the cover slot (if applicable).
Optional Half-height Bracket:
If your product includes a half-height bracket (included with single
IBM High IOPS Adapter products), and you are installing the device in a low-profile system, replace the
full-height bracket before installing the device. Please refer to the
section
Half-Height Bracket Installation
for details.
Power Cable:
If your device includes a power cable (included with some products), you may install it
now.
Attention
Additional power (through the cable) is required for newer products with multiple IBM High
IOPS Adapters.
For best results, plug in the power cable. See
Power Cables for Second Generation IBM High IOPS Duo
for instructions and to see if the power cable is required for your device. For more information
Adapters
on using the PCIe slot to provide additional power, see
.
Hardware Requirements
Grasp the IBM High IOPS Adapter by the top edge and seat it gently but firmly in the available PCIe slot, for
example:
Attention
This illustration is an example of one type of IBM High IOPS Adapter, your specific device will
install in the same manner.
Secure the IBM High IOPS Adapter's retaining bracket using a screw, lever, clasp, or other method (depending
on how your hardware is configured, consult your computer's documentation).
- 13 -
[no notes on this page]
