iBlue immobilizer, Руководство пользователя

Страница: 7 / 9

The immobilizer has two modes of operation.
In normal mode, entering the right PIN code enables the start up. The permission is valid
until the ignition is turned off.
In service mode the immobilizer automatically enables starting when ignition is turned on,
this time there is no need to use the PIN code.
The PUK code can be used to modify the PIN code. The card with the PUK code is included
in the box of the device.
IMPORTANT!
Please, make sure you keep the plastic card with the PUK code at a secure place so that it
cannot be accessed by unauthorised persons. The manufacturer and the distributor of the
iBlue Immobilizer disclaim responsibility for any and all damage arising from access to the
card by unauthorised persons.
During installation the mechanic does not need the card because the immobilizer automati-
cally starts in service mode. When starting to use the device with the smartphone for the first
time, it is mandatory to enter the PUK code. Subsequently, it is necessary to enter a 6 digit
PIN code of Your choice for the immobilizer.
In case you forget the PIN code, you can use the PUK code to set up another PIN code. In
case you register the product on our website, later on it will be possible to retrieve the PUK
code electronically.
IMPORTANT!
In case you do not own a smartphone, or cannot access the PUK card, in order to operate
the product the only option is to retrieve the PUK code of the previously registered product.
Please make sure you do not share the PIN code with unauthorised persons! The manu-
facturer and the distributor of the iBlue Immobilizer disclaim responsibility for any and all
damage arising from the sharing of the code with unauthorised persons.
Use the PUK code to adjust the PIN code / Set up the new PIN code
ENGLISH
XXXXXXXXXX YYYYYY