Manual - TBOX-QUAD4
5
www.ibiza-light.com
EN
3CH
Static colors
Stat
S 01-18
Static colors
Auto
Auto
Au 1-2
Auto program
Sound
Soun
So 1-2
Sound program
Speed
SPEE
SP 1-9
Speed
Mic Sensitivity SEnS
SE 1-9
MIC sensitivity
Edit color
Colo
r000-255
Red (0-100%)
g000-255
Green (0-100%)
b000-255
Blue (0-100%)
A000-255
Amber (0-100%)
Dimming
dIMM
dI1- dI 9
Master dimming
Silent scene
SILE
on/oFF
Silent scene by Sound program
Slave
SLAV
Slave
Slave
Infrared
InFr
on/oFF
Enable or disenable IR remote
IR REMOTE CONTROLLER
Please operate the remote control within a distance of 6m and 30° between the remote and the appliance. Aim
the remote at the sensor. Remove all obstacles between the remote and the sensor.
The remote control might not work properly if the sensor is exposed to strong sunshine.
If the remote control doesn’t work properly, please check the batteries.
BLACK OUT MODE
ON/OFF. Press BLACK OU
T to return the last modes.
AUTO MODE
1. Press <AUTO> on the IRC.
2. Press <+> or <–> to choose between the different AUTO programs.
SOUND MODE
1. Press <SOUND> on the IRC.
2. Press <+> or <–> to choose between the different SOUND programs.
STROBE MODE
1. Press <STROBE> on the IRC.
2. Press <+> or <–> to adjust the strobe rate.
3. Press <STROBE> again to turn off the strobe.
SPEED MODE
1. Press <SPEED> on the IRC.
2. Press <+> or <–> to adjust the auto/sound program speed.
SENSITIVITY MODE
1. Press <SENSITIVITY> on the IRC.
2. Press <+> or <–> to adjust the microphone sensitivity value on the light.
DMX/% MODE:
To enable DMX or disallow DMX on the product
MANUAL MODE
1. Press <MANUAL> on the IRC.
2. Press <R>, <G>, <B>, <A> to choose your color.
3. Press <+> or <–> to choose static colors.
FADE MODE
1. Press <FADE> on the IRC.
2. Press < FADE > again to turn off the FADE.
NUMBER 1-9:
Press digit <1> to <9> to change different brightness on the light.
INSTALLING THE BATTERIES IN THE REMOTE CONTROL
•
Place the remote face down on a flat surface.
•
Push the compartment cover into the direction of the arrow.
•
Slide the battery compartment open.
•
Remove the old battery and install the new one (CR2032) with the plus (+) symbol facing up.
•
Gently slide the battery compartment closed. It locks automatically.
RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with household waste but deposed correctly in accordance with
your local regulations..
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
When the internal batteries are not to be used, remove them to avoid damage caused by battery leakage or corrosion.
ATTENTION: Danger of explosion if battery is incorrectly placed. Only replace by the same or equivalent type.
WARNING :Do not swallow the battery. Danger of chemical burns. Keep new and old batteries out of the reach of children.
If the battery compartment doesn’t close properly, stop using the product and keep it out of the reach of children.
If you are in doubt whether the batteries have been swallowed or introduced into any other part of the body, contact immediately a doctor.
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.
•
Clean with soft cloth using normal glass cleaning fluid.
•
Always dry the parts carefully.
•
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
SPECIFICATIONS
Supply Voltage:
...............................................................................................................
100-240V~ 50/60Hz
Power: .....................................................................................................................................................18W
Consumption ............................................................................................................................................15W
Light source:
.............................................................................................................
4x 4W LED RGBA 4-in-1
Beam angle ................................................................................................................................................25°
Flash-rate ............................................................................................................................................ 0-20Hz
Fuse: ..........................................................................................................................................................1A
Operating modes ...........................................
DMX, Auto-run, Sound Control, Master-slave + remote control
Dimensions: ................................................................................................................... 144 x 144 x 121mm
Weight: ..................................................................................................................................................
1.3kg
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed.
