©Copyright LOTRONIC 2017
PLUTON10-LZR
Page 3
Features
•
11/13 DMX channels
•
Color wheel : 7 white
•
7 fixed gobos + spot
•
Green laser with 4 gobos
•
Gobo Shake & Gobo Scroll effects
•
Strobe effect
•
Manual focus
•
Modes : DMX, sound activated, master-slave or 4 built-in programs
•
5 dimmer curves (standard, stage, TV, architecture & theater)
•
Pan/Tilt inversion
•
Fan cooled
Specifications
Power supply ..................................................................................... 100-240Vac 50/60Hz
Consumption ............................................................................................................... 45W
Fuse ................................................................................................................................ 2A
Light sources ........................................................................................ 1x WHITE 12W LED
............................................................................................... Green laser 30mW (532nm)
Light output .................................................... 5120 lux @ 2m; 1189 lux @4m (13° beam)
Beam angle .................................................................................................................... 13°
Pan/Tilt ................................................................................................. 540°/230° (16 bits)
Dimensions .......................................................................................... 159 x 147 x 265mm
Weight ........................................................................................................................ 3.4kg
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure
and able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times
the weight of the unit when installing the fixture.
The equipment must be fixed by professionals at a place where is out of the reach of people and where nobody can
pass by or under it.
Fuse Replacement
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
With a flat head screwdriver wedge the fuse holder out of its housing.
Remove the damaged fuse from its holder and replace with exactly the same type of fuse.
Insert the fuse holder back in its place and reconnect power.
CONTROL PANEL
To access the main menu press the MENU button. Press the UP or DOWN buttons until you reach function you wish
to change. When you reach the function you wish to change, press the ENTER
button. When a function is selected, use the UP or DOWN buttons to change the
function settings. Once your changes are made, press the ENTER button, and
then press and hold the MENU button for at least three seconds to confirm and
lock the change into the system memory. To exit without making any
adjustments, press the MENU BUTTON. The display will lock after 30 secondes.
Press the MENU button for 3 seconds to unlock.
