© Copyright LOTRONIC 2012 LMH400LED-MKII
Page 5
Master/slave mode (auto-running, sound control)
This mode will allow you to link up 32 units together without a controller.
Use standard DMX cables to daisy chain your units together via the DMX connecter on the rear of the units. For
proper performance it may be necessary to use a terminator at the last fixture.
Choose a unit to function as the Master. Select
NAFA/NASL
or
NstS
(see below for readout) depending upon which
master mode you require. The master unit must be the first unit in line. Finally, chain the units together via a DMX
cable.
To set the pan to inversion
Press the
MENU
until it shows
RPOF
.
Use the
UP/DOWN
buttons to display
RPON
, press
ENTER
to confirm.
To set the tilt to inversion
Press the
MENU
until it shows
RTOF
Use the
UP/DOWN
buttons to display
RTON
, press
ENTER
to confirm.
To set the LED readout to inverting or non-inverting
Press the
MENU
until it shows
RDOF
.
Use the
UP/DOWN
buttons to display
RDON
, press
ENTER
to confirm.
Resume reverter windows to default setting
Press the
MENU
until it shows
DFON
.
Press
ENTER
to confirm.
DMX Mode
This mode allows the unit to be controlled by any universal DMX controller.
The default mode for the fixture in DMX is as follows.
DMX CHANNEL
CHANNEL
FUNCTION
VALUE
DESCRIPTION
1
PAN
0 – 255
Pan rotate ( 0 to 585° )
2
TILT
0 – 255
Tilt rotate ( 0 to 225° )
3
COLOR WHEEL
0 – 17
18 – 34
35 – 51
52 – 68
69 – 85
86 – 102
103 – 119
120 – 127
128 – 192
193 – 255
No
Color 1
Color 2
Color 3
Color 4
Color 5
Color 6
Color 7
Auto color rotate, speed increase
Reverse auto color rotate, speed increase
4
GOBO WHEEL
0 – 20
No
