Ibiza LED8-MINI, Руководство пользователя

Страница: 21 / 47

©Copyright LOTRONIC 2016 LED8-MINI Page 21
SLND
Mast
SL 1
SL 2 ( MAST,SL OPTION)
SHND SH 0 – SH 15, Select the show mode
AUTO
OFF
ON (Auto Mode)
SOUN On – Off (SOUND CONTROL)
SENS 000 – 100 Sound sensitivity control (0 close, 100 The most sensitive)
LED On - Off (Background LIGHT ON/OFF)
DISP
Disp
Dsip (Reverse Display)
PINT Yes - No (PAN Reverse)
TINT Yes - No (TIL Reverse)
TEST Test
RSET Reset
Settings
DMX Address Setting
1. Press the MENU button until “ ADDR ” is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired
address.
3. Press ENTER to confirm.
DMX channel mode
1. Press the MENU button until “ CHND ” is displayed, press ENTER. Either “ 10CH ”, “ 14CH ” will be displayed
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to confirm and exit.
Master/Slave selection
1. Press the MENU button until “
SLND
” is displayed, press ENTER. Either “
MAST
”, “
SL 1
” or “
SL 2
” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is displayed, and press ENTER to confirm.
Show modes 0-15 (Factory programs).
Show mode can run with or without sound active mode active.
1. Press the MENU button until “ SHND ” is displayed, press ENTER.
2.
“Sh X”
will now be displayed, “X” representing a number between 0-15. Programs 1-15 are factory programs,
while “Sh 0” is random mode. Press the UP or DOWN buttons to find your desired show.
3. When you ha ve found your desired show press ENTER, then press and hold the MENU button for at least 3
seconds to activate. After you have set your desired show, it can be changed at any time using the UP or DOWN
buttons.
AUTO program
1. Press the MENU button until “ AUTO ” is displayed, press ENTER.
2. The Display will show either “ ON” or “OFF ”. Press the UP or DOWN buttons to select “ ON ” or “ OFF ”.
Sound Active mode
1. Press the MENU button until “ SOUN ” is displayed, press ENTER.
2. The display will show either “ ON” or “OFF ”. Press the UP or DOWN buttons to select “ ON ” to activate sound active