Manual - LED-UV24
4
©Copyright LOTRONIC 2020
MASTER/SLAVE FIXTURE LINKING
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first
fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the
input connector of the next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the
output as stated above to the input of the following fixture and so on
Often, the set up for Master-Slave and Stand-alone operation requires that the first fixture in the chain be initial
-
ized for this purpose via either settings in the control panel or DIP-switches. Secondarily, the fixtures that follow
may also require a slave setting. Please consult the '' Operating Instructions» section in this manual for complete
instructions for this type of setup and configuration.
OPERATING INSTRUCTIONS
NAVIGATION THROUGH THE CONTROL PANEL
Access control panel functions using the four panel buttons located directly underneath the LCD Display..
Button
Function
MENU
Used to access the menu or to return to a previous menu option
UP
Scrolls through menu options in ascending order
DOWN
Scrolls through menu options in descending order
ENTER
Used to select and store the current menu or option within a menu
To access the main menu press the MENU button. Press the UP or DOWN buttons until you reach function you
wish to change. When you reach the function you wish to change, press the ENTER button. When a function
is selected, use the UP or DOWN buttons to change the function settings. Once your changes are made, press
the ENTER button, and then press and hold the MENU button for at least three seconds to confirm and lock the
change into the system memory. To exit without making any adjustments, press the MENU BUTTON. The display
will lock after 30 secondes. Press the MENU button for 3 seconds to unlock
FUNCTION MENU
d001
d512
DMX Address setting
Auxx
Au1
Auto mode 1
Au2
Auto mode 2
Au3
Auto mode 3
Au4
Auto mode 4
Au5
Auto mode 5
Au6
Auto mode 6
Au7
Auto mode 7
Au8
Auto mode 8
Au9
Auto mode 9
Au10
Gradual change
So01
Sound control Jump change
So02
Sound control Strobe
St00
St00
Auto master without strobe
St01->St16
Auto master strobe speed from slow -> fast
SP00
SP16
Auto master Au08/Au09/Au10 speed from slow -> fast
R01
UV255
UV max brightness setting for Row 1
G01
UV255
UV max brightness setting for Row 2
b01
UV255
UV max brightness setting for Row 3
W01
UV255
UV max brightness setting for Row 4
UP
DOWN
MENU
ENTER
8.8.8.8.
