DMX512
1. Install the units in a suitable position (laying or appending).
2. Use standard XLR microphone cable chain your units together via the
XLR connector on the rear of the units. For longer cable runs we suggest
a terminator at the last fixture.
3. Assign a DMX address to each the unit using dipswitches; see the
"DMX Address Quick Reference Char». (All units set to #1 and #10 on will
be OK)
4. Turn on all units' power, the units begins reset, then the unit begins
working.
5. Use DMX console to control your units.
DMX address calculation
For DMX mode, DMX512 address from #1 to 9# dipswitches must be set,
the address is set from 1 to 511. Each dipswitch represents a binary
value.
No. Digital
No.
No. Digital
No.
1st 1
6th 32
2nd 2
7th 64
3rd 4
8th 128
4th 8
9th 256
5th
16
10th
Set to 0
One unit has 12 channels, so each unit must be assigns 12 channels
at least
Loop Address
Binary
Dipswitches
1
1
100000000
＃
1
2
13
101100000
＃
1 + #3+#4
3
25
100110000
＃
1 + #4+#5
N
(N-1)*12+1
The dipswitches setting for DMX address see the " DMX Address
Quick Reference Chart ".
3
DMX Control Parameter Chart
Channel No
DMX512 fig.
Content
0~49 Sound
control
50~99 Auto-
beam
100-149 Auto-animation
Channel 1
Control
mode
150~255 manual
0 Laser
off
Channel 2 Color select
1-255
Green, red, blue, yellow,
cyan, mink, white
Channel 3
Pattern
select
0-255 patterns
0-127 Manual
128-191
From down to up speedy
Channel 4 Vertical
move
192-255
From up to down speedy
1~127 Manual
128-191
From right to left move
Channel 5
Horizontal
move
192-255
From left to right move
Channel 6
Vertical
rotate
0-255
From slow to speedy
Channel 7
Horizontal
rotate
0-255
From slow to speedy
0-127 manual
128-191 Anticlockwise
rotate
Channel 8 rotate
192-255 Clockwise
rotate
0 static
1-85
From small to big
86-170
From big to small
Channel 9
zoom
171-255 Auto
zoom
0 normal
size
Channel
10
Pattern size
1-255
Small to big
Channel
11
Spot and line
0-255
Line to spot
Channel
12
Twinkle
speed
0-22
Slow to speedy
4
Only when the Channel 2 is selected to DMX value 128---255,
the Sound control and Auto function in Channel 1 is valid.
