©Copyright LOTRONIC 2017
PAR-TRUSS-BAT
Page 7
8. IR controller
BLACK OUT Mode
1. Press BLACK OUT to switch the light off or on.
AUTO Mode
Press to enter the built-in show mode.
Press <+> or <–> to select one of the built-in programs.
SOUND Mode
When the unit is in show mode, press this button to set the speed from
SP01-SP99 via the <+> or <–> button.
STROBE Mode
To adjust the strobe speed of the sound active program.
1. Press <STROBE> on the IRC.
2. Press <+> or <–> to either increase or decrease the speed of the program.
3. Press <STROBE> again to turn off the strobe.
SENSITIVITY Mode
To adjust sound sensitivity for the Sound-Active mode
1. Press <SENSITIVITY> on the IRC.
2. Press <+> or <–> to either increase or decrease sound sensitivity.
% Mode
Quick set up button allows entering directly the desired value. E.g. to set the
SPEED value, press % -> SPEED ->55->%. The speed value SP is now set to 55. To
set the brightness of red e.g., press %->R->123->%. The red luminance value is now set to r123.
Please note: The values must be within the setting range otherwise they will be unvalid.
MANUAL Mode
1. Press <MANUAL> on the IRC.
2. Press <R>, <G>, <B>, <W> (red, green, blue or white) to choose your color.
3. Press again <R>, <G>, <B>, <W> (red, green, blue or white) to close your color.
FADE Mode
Press to enter into the built-in show mode and run program Sh03.
R
: Press this button, enter the R setting mode, press "+" or "-" button to set the current red luminance value r000 ~
r255
G:
Press this button to enter the G-setting mode, press "+" or "-" button to set the current green luminance value
g000 ~ g255
B:
Press this button to enter the B setting mode, press "+" or "-" button to set the current value of the blue
luminance b000 ~ b255
A:
Amber
UV:
Mix color
W:
Press this button, enter the W setting mode, press "+" or "-" button to set the current white luminance value
u000 ~ u255
0:
White
1:
Red
2:
Dark yellow
3:
Yellow
4:
Green
5:
Indigo
6:
Blue
7:
Purple
8:
Dark Red
9:
Light yellow