©Copyright LOTRONIC 2016
LMH-MINIWASH
Page 8
LEd
OFF
Display light off after 5s
ON
Display light alway on
dISP
no
Display inverse
YES
Display forward
rPAN
no
X Motor forward running
YES
X Motor Inverse running
rTiL
no
Y Motor forward running
YES
Y Motor Inverse running
REST
YES
System Reset
Addr
1. Press the either the ME
NU, UP, or DOWN buttons until
“Addr”
is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired
address. Press ENTER to set your desired DMX address.
CHnd
The LED moving head have
16/18
channels, can receive the International DMX signal.
SLnd
There are [Auto] , [Soun] , [SL 1] and [SL2] can be choose. [Auto] is Auto mode, [Soun] is Sound control mode, [SL
1] is DMX Control mode, [SL 2] Slave mode
SHnd --Show mode set
In the [SHnd]
，
There are [SH 0] to [SH 3] to choose
SEnS.
In this Mode, there is a number between 0-
99 will be displayed. Press the UP or DOWN buttons to adjust the sound
sensitivity. 0 being the least sensitive, and 99 being the most sensitive.
BLnd
In this Mode, you can Choose [bLAc] No DMX512 Signal return to zero.
[Auto] No DMX512 Signal Auto running
[Soun] No DMX512 Signal sound control
[HoLd] No DMX512 Signal keep last DMX Control state
LED -- With this function you can have the LED display turn off after 5 seconds.
1. Press the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or DOWN buttons to select “
ON
” to keep the LED display
on at all times, or “
OFF
” to switch to have the LED display switch off after 5 seconds.
3. Press ENTER to confirm. To make the LED display reappear after it has turned off, press any button.
