PORT-VHF-MKII-TWS series
6
PLAY MP3/WMA MUSIC
1. Switch on power (23). The LED indicator (22) lights up in green.
2. Insert a USB stick (1) or an SD card (13) into the relevant input
3.
Select a title via the
or
buttons and press
▶ǁ
(16)
TO PLAY LINE IN MUSIC
1. Insert an RCA plug into the LINE IN sockets (8)
2. Insert a wired microphone into MIC INPUT (9)
3. Adjust the MIC VOL (5)
VOX FUNCTION
When VOX function is enabled, the music level will decrease when somebody talks into one of the microphones. The music
level becomes normal when the user stops talking into the microphone.
To activate this function, switch the VCV switch (19) to on. If you want to disable this function, set this switch to off position
REC FUNCTION
Disconnect the speakerbox from your Bluetooth device. Insert a USB stick or SD card. The speaker will automatically switch
into USB/SD mode. Connect now the speakerbox to your Bluetooth device and start playing your music. Short press the REC
button to record your voice and the music on the inserted USB stick or SD card. Press again to stop recording. Keep the REC
button pressed to play the recorded file.
BLUETOOTH FUNCTION
1. Switch on your Bluetooth device and activate the Bluetooth connect function
2. Select IBIZA-PORT in the list of found devices and connect.
3. Press the MODE switch to BT function,
4. Now you can play Bluetooth music.
TWS FUNCTION
)
This function allows to pair 2 units of the PORT-VHF-MKII-TWS range with 1 single Bluetooth source to enjoy wireless stereo
sound.
Turn off the Bluetooth feature on your smartphone. Switch on both speakers and select BT-AUDIO mode on both. Keep the
TWS button on one of the speakers (master speaker) pressed for a few seconds. If the connection was successful, you will
hear the message “left channel” from the master speaker, and “right channel” from the slave speaker. Activate the Bluetoo
-
th function of your smartphone and select IBIZA-PORT in the list of found devices. Now the master speaker is connected to
your Bluetooth source. After that, you can use any mode to play music in TWS mode.
HOW TO USE THE VHF MICS
PORT8VHF-MKII-TWS
: Press the VHF ON/OFF button (27) to activate the VHF function. Turn on the VHF microphone using
the switch on the microphone body. Adjust the volume using the VHF volume control (6).
PORT12/15VHF-MKII-TWS
: Activate the VHF function by rotating the VHF VOL knob. A or B (6) to the right. Turn on the VHF
microphone using the switch on the microphone body. The speaker will automatically select the wireless microphone. Adjust
the volume using the VHF volume controls (6).
REMOTE CONTROL
ON/OFF
button
MODE
: Press until the desired operating mode is displayed
MUTE
: Sound stop
▶ǁ
Play/pause
: Press to play a track, press to pause. In FM mode: Search for radio stations
REC
: Press to start, stop and play a recorded file
/CH-
: back to the previous track. In FM mode: back to the previous radio station
/CH+
: Go to the next track. In FM mode: Go to the next radio station
RPT
: Repeat one/repeat all tracks
TWS
: Press to switch the unit into TWS pairing mode to connect to a 2nd PORT-VHF-MKII-
TWS box
VOL-
: Reduce the volume
Vol+
: Increase the volume
EQ
: Select among several sound modes (Rock, Pop, Jazz, Classic, Flat)
TRK
: Track selection. Press the TRK button, select a track via the number keys (0-9) and
press ENTER to confirm
Number buttons
: Press the number of the desired track
ENTER
: Once you have made your selection, press ENTER to confirm.
