ibis RIPMO, Инструкция

Страница: 16 / 37

28 29
Add recommended air for rider weight (see charts
on following pages). On any fork with a lever, make
sure to set sag with the compression lever in the
OPEN mode. With bike on level ground, bounce up
and down a bit to overcome shock stiction. Settle
into your riding position.
Slide o-ring until it rests on
wiper, then dismount without
disturbing o-ring’s position.
Measure sag–the distance from o-ring
to wiper. Start with the amount of sag
recommended for your bike and riding
style (listed on the next page) and
adjust to your preference.
STEP 1 STEP 2 STEP 3
IB
IS
’ H
AN
DY
S
AG
M
EA
SU
RER
IN
M
IL
LI
M
ET
ER
S
With the advent of our Traction Tune philosophy of suspension setup,
we are now recommending two different methods of setting sag.
1.
For the shorter travel bikes, we recommend setting sag using
the traditional method in the seated position: Sit on your bike in
a normal riding position, bouncing up and down a couple times
to seat the suspension. Reach down and slide the o–ring up the
shock shaft against the wiper seal. Next, gently step off of the
bike taking care not to further compress the suspension.
2. For the more gravity oriented bikes, the HD5 and the Ripmo,
please see the standing method of setting sag on page 30.
RI
D
E
RI
D
E
FORK SET-UP FORK SET-UP