ibis Moja HD3, Инструкция по эксплуатации

Страница: 22 / 34

40 41
MaINTENaNcE MaINTENaNcE
Working on Ripley
This information is shown in a video:
http://tinyurl.com/n8f9o4p
Should you find it necessary to replace
any of the bearings on the Ripley eccentric
linkages, you will need to remove the
swingarm. For that, you will need the
following tools:
•
12mm open end wrench
•
2 x 6mm Allen wrench
•
1 x 5mm Allen wrench
•
2 x 4mm Allen wrenches
Bearing Replacement
Please refer to the section on Ripley
Swingarm Removal on
pages 48–51.
Complete instructions can be found
on this video:
http://tinyurl.com/n8f9o4p
or on our website at
http://www.ibiscycles.
com/support/technical_articles/ripley_
bearing_replacement/
Ripley Bearing Specs
Eccentric Core Inner Bearings:
•
6806-2RS (30 x 42 x 7)
These are the same as BB30 bearings.
Lower Outer Bearings:
•
608-RS 8x22x7
These mount in the swingarm and can
be found in skate shops.
Upper Outerbearing:
•
698-RS 8x19x6
These mount in the swingarm and can
be found in skate shops.
Working on Mojo hd3
The linkage assemblies on the HD3 are
designed to be removed and replaced
easily. Be sure to purchase a fresh link
set before removing the old ones to skip
any downtime. There are no bearings to
press out, nor any axles to hammer. Upper
and lower pivot assemblies are available
in the buy section of our website, or you
can have your dealer order them from Ibis
for you. Replacement is super simple and
requires these common tools:
• 2x 4mm Allen wrenches
• 2x 6mm Allen wrenches
• 2x 5mm Allen wrenches
Loctite 243 (or 242) blue thread locker
Replacing Linkages
Please refer to the section on Mojo HD3
Swingarm Removal in this manual on
pages 52–53.
Bearing Replacement
If you’re handy with a bench vice and have
a good supply of sockets, you can attempt
the replacement of the bearings in the
upper and lower link yourself. While we
don’t have step–by–step instructions, you
are welcome to purchase the bearings and
try it yourself.
Mojo hd3 Bearing Specs
The lower links use DDR1526 bearings
on the drive side and 6902rs on the
non-drive side.
The upper links are 6800rs all around.