iBell RH20-23, Руководство оператора

Страница: 10 / 16

10
Mode Description
Rotary drilling: for screw-
driving and for drilling into
steel, wood and plastics
Hammer-drilling: for concrete
and masonry drilling
operations.
PRODUCT FUNCTIONS AND ASSEMBLY
IBL RH20-23/25
To start the tool, simply press the trigger
switch (3). Tool speed is increased by
increasing pressure on the switch trigger.
Release the trigger switch to stop. For
continuous operation, press the switch
trigger and then push in the lock button (4).
To stop the tool from the locked position,
pull the switch trigger fully, then release it.
ON/OFF TRIGGER SWITCH AND LOCK BUTTON
WARNING!
Before plugging in the tool, always check that the switch
trigger actuates properly and returns to the "OFF" position when released.
MODE ADJUSTMENT
It is possible to adjust the mode operation knob (2) drilling or
hammer-drilling operations.
To select the operating mode, turn
the knob until it points to the required mode. Release the mode
selector and check that it is locked in place.