iBell JS10-70, Руководство оператора

Страница: 7 / 17

6

Keep your hands away from cutting area and the blade. Hold the
power tool by insulated gripping surfaces only and second hand
on motor housing.
Keep your body positioned to either side of the
blade, but not in line with the blade.

Do not hold the material to be worked in your hands, it’s
important that the material be adequately clamped down, reducing
the contact with the body and the possibility of losing control.

Do not operate the tool on surfaces under which there might be
electrical wires, and water or gas pipes
. The contact with wires
or water might cause electrical shocks. The motor generates sparks
that, if in contact with flammable gases, might cause explosion.

Always use blades of correct sizes and parameters . Suitable
blades are available with the product.

Do not overload your tool , use it only for the adequate purpose.
Using the power tools for purposes that are different from what is
indicated in this manual (refer ‘Intended Use’) might lead to
hazardous situations.

Never force the tool. Forcing the tool can cause uneven cuts, loss
of accuracy, and possible kickback. Push the tool forward at a
speed so that the blade cuts without slowing.

Keep bystanders a safe distance away from work area. Anyone
entering the work area must wear personal protective equipment.

When operating the tool, keep the cord away from the cutting area
and position it so that it will not be caught on the work piece
during the cutting operation.

The use of this tool create and/or spread dust that may cause
serious and permanent respiratory injuries
. To reduce the
exposure to these substances, work in well-ventilated places and
always
use dust mask.

Wear ear protectors. Exposure to noise can cause hearing loss.
Wear safety goggles or eye protection when using this power
tool. For additional protection against electric shock, be sure to
wear rubber gloves.
JIG SAW SAFETY WARNINGS
IBL JS10-70