iBell GG30-01, Руководство оператора, Страница: 4 / 9

3

Before use always examine the glue gun , look for loose parts or
other objects, and bare or broken wires. If there are any defects
or distinct features on the device, interrupt the gluing procedure
immediately and have the glue gun repaired.

Work area environment should be considered. Keep work area
clean and well lit. Do not expose the gun to rain, in damp or wet
locations. Never use it in the proximity of highly inflammable or
potential explosive materials.

In order to avoid damaging the trigger, only pull this when the
glue has melted completely. Do not abuse the cord or carry tool
by cord or yank it to disconnect from receptacle. This will either
cause damage to the product or yourself. Keep cord from heat,
oil, and sharp edges.

Do not touch the nozzle or the hot glue . To avoid the risk of
burns do not touch the jet or hot glue. Do not let the hot glue
touch people or animals. If there is contact with skin immediately
put the affected area under cold running water.

The gun must be stood on its stand when not in use. It is
crucial that the glue gun is allowed to cool down completely on
the relevant stand before it is packed away.

Never attempt to use any material other than recommended
glue sticks, sealer, or caulk sticks in the glue gun.
Do not
attempt to melt crayons or candles. Permanent damage to the
glue gun could result. Hot-melt adhesives can be used in place of
nails, staples, tapes, or liquid glue. However, they should not be
used to replace structural fastener where heavy loads are
involved.

Use only the accessories and attachments detailed in the
operating instructions, or those which are compatible with the
device.
GLUE GUN SAFETY INSTRUCTIONS
WARNING!
Read all safety warnings, instructions, illustrations
and specifications provided with this product. Failure to follow all
instructions listed below may result in electric shock, fire and/or
serious injury. Save all warnings and instructions for future reference.
IBL GG30-01