iBeLink BMx Common exception handling
2
/
6
1 Low hashrate
1.1 Machine warm up not completed
After restarting, it needs to run for about 30-60 minutes, then the hashrate will basically approach
the theoretical value. The hashrate curve of some pools may be slower, so it needs to wait for a
longer time. Maybe you should take a look at the hashrate after 24 hours.
Fig. 1 BM-K1 local hashrate
The theoretical hashrate of BM-K1 is 5.3T
，
Fig. 1 the former is 15 minutes hashrate statistics in
red box, while the latter shows average hashrate statistics. Fig. 2 shows the statistics of hashrate in
the mine pool. It is necessary to note that the hashrate may fluctuate 5% up and down.
Fig. 2 BM-K1 pool hashrate
1.2
Missing hashboard
Currently, except for bm-k1, there is only one hashboard (see Fig. 1), there are 3 hashboards of 0,
1 and 2 (for example bm-n1, the three hashboards on the left side of Fig. 3 correspond to bm-n10,
bm-n11 and bm-n12 respectively). Generally, the mining machine itself has a 10 minutes hashrate
loss recovery mechanism, If a hashboard is divided by abnormal state (it can be found by the
temperature of the hashboard and the hashrate statistics of the hashboard) for more than 20
minutes, it may need to manually power off and restart. If the hashboard is still abnormal after
restart or the calculation board is lost (red indicator light is on), then contact the after-sales and
return to the factory for maintenance.
