386-257-1187
|
2
Monitor install and wiring
1. Select the desired mounting option
for the monitor. There are two options,
a suction cup mount to mount to the
windshield
(Figure A.1)
or double stick
tape to be mounted to the dashboard
(Figure A.2)
. Slide the desired mount
onto the back of the monitor.
2. Clean the surface on which you wish
to mount the monitor and mount the
monitor by either the double sided tape
or suction cup.
3. Plug the DC socket into the monitor and
run the wire in the path shown in Figure
A so safely hide the wire from being
pulled or caught on while operating the
vehicle.
4. Plug the DC socket into the socket in
the vehicle. There is an additional USB
port on the back of the DC socket so
smart device charging can still be done.
(Figure B)
NOTE:
If your vehicle DC socket has power
while the vehicle is powered down, you may
need to unplug the monitor while parked so
the battery does not discharge.
Figure A
Figure B
2 Amp Charging port
1
2
MONITOR INSTALLATION
