IBEA KRATOS 35 Скачать руководство пользователя страница 8

27

Disassemble & assemble the charging plug 

Push the charging plug inward in parallel with the socket of the charger to complete the 

installation.      

Press and hold the disassembly button as shown in Figure 1, and simultaneously push 

the charging plug outward.

Supplied adapter.

1. Please confirm the power of the battery pack before use.

2. When the trimmers are not in use, make sure that the trimmers and the power supply 

are disconnected. Please bear in mind that the power supply of the trimmers must be 

disconnected in the process of refueling, grinding blade and replacing blade.

3. Please check the tightness of the blade before use (see P11).

Use and maintenance

Instructions before use:

Operating instructions

1. Open the package and insert the battery pack into the insertion interface of the 

electric trimmer.

2. Turn on the power control switch, and the power indicator is green. (see P3) 

3.When the power is on for the first time, the buzzer rings twice, and the trigger is pulled 

twice continuously to enter the activation state.

4. Normal shearing: press the trigger and the blade closes. Release the trigger and the 

blades open. Blade closing: press the trigger continuously, and the long sound of buzzer 

is the blade closing state.

5. Before working, please press the trigger intermittently to close the blade without load 

for several times to check whether it is normal.

6. Start working after normal operation.

7. In the event that the branches are small in diameter and you want to speed up the cut, 

set the opening of the blades at 25 mm instead of 35 mm. For this setting, proceed as 

follows: after turning on the machine, press and hold the trigger for 2 seconds, until an 

acoustic signal is emitted. To restore the previous setting, repeat the operation.

Packing operations

1. Press and hold the trigger for more than 5 seconds, release the trigger, the blade will 

close and no longer open.

2. Turn off the power and remove the battery.

3. Sorting, cleaning and packing.

Pruner

ON/OFF

button

Battery

ON/OFF

button

Содержание KRATOS 35






















Отзывы: