Instruction Manual for 40lt Planetary Mixer TF40B
www.allaboutbakery.com.au 15
•
Slide the attachment up on the shaft and turn it until the drive pin in the shaft reaches
the L-Shaped slot in the attachment shank.
•
Raise the bowl using the hand wheel, ensuring that the bowl is fully raised.
•
Close the safety guard completely.
•
Select appropriate gear speed and press the green start button (Fig 3.1, B).
•
The machine will now operate until the emergency stop button is pressed, the safety
guard is opened or the bowl is lowered.
•
When changing gears, open the safety guard to stop the machine, change to the new
speed, close the guard and press the green start button (Fig 3.1, b) to recommence
machine operation.
Note:
Machine must be stopped before changing speeds, failure to do so could result in
damaging the machine and voiding warranty.
4.
Cleaning &Maintanance:
4.1 Cleaning
•
Always turn power off at the wall and unplug machine prior to cleaning or
maintenance.
•
Keeping the machine cleaned helps to maintain the efficient hassle-free operation of
the machine.
•
This machine should be cleaned at the end of every day, to prevent a build up of cake
batter etc.
•
Remove excess flour dust with a soft brush.
•
Use a plastic scraper to remove any cake remnants from the machine body.
•
Wipe over the entire machine with a damp cloth with a neutral detergent. Harsh
chemicals will damage the machine.
•
Stainless steel bowls and attachments can be washed in the sink with other utensils.
