IBASE Technology UPC-6210 Series Скачать руководство пользователя страница 31

Страница: 31 / 65

Driver Installation

UPC-6210 User Manual

3.1 Introduction

This section describes the installation procedures for software drivers. The
software drivers are in a disk enclosed with the product package. If you find
anything missing, please contact the distributor where you made the
purchase.

Note:

After installing your Windows operating system, you must install the
Intel

Chipset Software Installation Utility first before proceeding with

the drivers installation.

3.2 Intel

Chipset Software Installation Utility

The Intel

Chipset drivers should be installed first before the software drivers

to install INF files for Plug & Play function for the chipset components. Follow
the instructions below to complete the installation.

1. Insert the disk enclosed in the package. Click

Intel

and then

Intel(R)

Baytrail Chipset Drivers

2. Click

Intel(R) Chipset Software Installation Utility

3. When the

Welcome

screen to the Intel

Chipset Device Software appears,

click

Next

to continue.

4. Click

Yes

to accept the software license agreement and proceed with the

installation process.

5. The driver has been completely installed. Click

Finish

and restart the

computer for changes to take effect.

Содержание UPC-6210 Series


































































Результаты поиска

Содержание UPC-6210 Series

Отзывы:

IBASE Technology UPC-6210 Series, Руководство пользователя, Страница: 31 / 65

Результаты поиска

Содержание UPC-6210 Series

Отзывы: