Hardware Configuration
UMT-7211 User Manual
9
2
2.1.3 SSD
Replacement
1. After removing the rear cover, unscrew the following 4 screws to remove
the SSD/HDD tray.
2. Unplug the cables of the SSD. Unscrew the 4 screws on the bottom of the
tray to release the SSD and replace it with a new one.
3. Secure the new SSD to the tray, fix it onto the motherboard, and connect
the cables.
2.1.4
Mini-PCIe & M.2 Card Installation
To replace or install a mini-PCIe card or an M.2 card, perform the following
steps after removing the rear cover.
1. Locate the mini-PCIe or M.2 slot, align the key of the card to the interface,
and insert the card slantwise.
(Insert the M.2 card in the same way.)
2. Push the card down and fix it with the supplied flat head screw.
(Fix the M.2 card with a round head screw.)
Mini-PCIe:
M.2:
