8
Components
I/O View
Refer to the diagram below to identify the components on this side of the system.
The power switch allows powering ON and OFF the system.
HDD
The hard disk LED blinks when data is being written into or read from the hard
disk drive.
PWR
The power LED illuminated when system been power on.
DVI-I
The Digital Visual Interface (DVI) port supports a high quality VGA-compatible
device such as a monitor or projector to allow viewing on a larger external display.
This connector contain digital and analog video signal, you can use specified
cable to obtain standard analog VGA output.
The stereo headphone jack (3.5mm) is used to connect the audio signal into
system to record or bypass it to storage or LINE OUT.
The stereo audio jack (3.5mm) is used to connect the system’s audio out signal to
amplified speakers or headphones.