IBASE Technology SI-111-N, Руководство пользователя, Страница: 16 / 63

10 SI-111-N User Manual
2.1.2 Installing Memory Modules and M.2 Cards
After removing the bottom cover, you are now able to access the J9 DDR4
memory slot as shown below. To install and remove a memory module, follow
the steps below.
1. Align the key of the memory module with that on the memory slot and
insert the module slantwise.
2. Gently push the module in an upright position until the clips of the slot
close to hold the module in place when the module touches the bottom of
the slot.
3. To remove the module, press the ejector tabs outwards with your
fingertips.
4. The second memory slot, J3, can be found on the other side (top) of the
board. Repeat the previous steps to install/replace a memory module.