IBASE Technology OFP-151-PC, Руководство пользователя

Страница: 50 / 129

40 OFP Panel PC Series User Manual
2.4.7 Front Panel Connector (J6)
Pin Assignment Pin Assignment
1 Ground 2 PWR_BTN
3 3.3V 4 HDD Active
5 Ground 6 Reset
7 +5V 8 Ground
J6 is utilized for system indicators to provide light indication of the computer
activities and switches to change the computer status. It provides interfaces for
the following functions.

ATX Power ON Switch (Pins 1 and 2)
The 2 pins makes an “ATX Power Supply On/Off Switch” for the system
that connects to the power switch on the case. When pressed, the power
switch will force the system to power on. When pressed again, it will power
off the system.

Hard Disk Drive LED Connector (Pins 3 and 4)
This connector connects to the hard drive activity LED on control panel.
This LED will flash when the HDD is being accessed.

Reset Switch (Pins 5 and 6)
The reset switch allows you to reset the system without turning the main
power switch off and then on again. Orientation is not required when
making a connection to this header.

Power LED: Pins 7 and 8
This connector connects to the system power LED on control panel. This
LED will light when the system turns on.
1 2
8
7