90
MPT-7000V User Manual
⚫
Setting PB Voltage Offset
MCU provides command to set UPS battery voltage offset. It can
adjust this voltage disparity between actual measurement and
detected form MCU.
⚫
Getting status
MCU provides command to get current status which includes the
power on delay timer setting, power off delay timer setting, low delay
setting value, DC off timer value, temperature protect setting value,
voltage protect setting value, Car battery & UPS battery voltage offset
setting value, UPS battery charge voltage setting value and current
Car battery (CB) & UPS battery(PB) voltage and current temperature
of power board.
Note:
Before using the ISP, your software engineer has to make sure the
firmware version (GET_FORMWARE_VERSION) MUST be as follows
to make the ISP function workable.
Major version is 0.
Minor version is 0.
Build version is 5 (or above).