IBASE Technology MB892, Руководство пользователя, Страница: 27 / 66

INSTALLATIONS
Power LED: Pins 9-11
The indicates the status of the main power switch.
Pin # Signal Name
9 Power LED
10 NC
11 Ground
ATX Power ON Switch: Pins 5 and 13
This 2-pin connector is an “ATX Power Supply On/Off
Switch” on the system that connects to the power switch on
the case. When pressed, the power switch will force the
system to power on. When pressed again, it will force the
system to power off.
Pin # Signal Name
5 PS_ON
13 Ground
SMI/Hardware Switch: Pins 6 and 14
This connector supports the "Green Switch" on the control
panel, which, when pressed, will force the system into the
power-saving mode immediately.
Pin # Signal Name
6 SMI
14 Ground
Reset Switch: Pins 7 and 15
The reset switch allows the user to reset the system without
turning the main power switch off and then on again.
Pin # Signal Name
7 Reset#
15 Ground
Hard Disk Drive LED Connector: Pins 8 and 16
This connects to the hard drive activity LED on control
panel. This LED will flash when HDD is being accessed.
Pin # Signal Name
8 HDD Active
16 5V
MB892 User’s Manual 23