IBASE Technology IPPC1505-RE, Руководство пользователя

Страница: 25 / 86

16 IPPC1505/1705/1905-RE User Manual
2.3 Setting the Jumpers
Configure the jumpers with the settings required to be able to use the features
needed for your application. Contact your supplier if you have doubts about
the best configuration for your use.
2.3.1 How to Set the Jumpers
Jumpers are short-length conductors consisting of several metal pins with a
non-conductive base mounted on the circuit board. Jumper caps are used to
have the functions and features enabled or disabled. If a jumper has 3 pins,
you can connect either PIN1 to PIN2 or PIN2 to PIN3 by shorting with the
jumper cap.
A 3-pin jumper A jumper cap
Refer to the illustration below to set the jumpers.
Pin closed Oblique view Illustration
Open
1-2
2-3
When two pins of a jumper are encased in a jumper cap, this jumper is
closed , i.e. turned On .
When a jumper cap is removed from two jumper pins, this jumper is
open , i.e.
turned Off .
Pin# 1
2
3
1 2 3
1 2 3
1 2 3