50
IB995
User’s Manual
4.4.1
Connectivity Configuration
BIOS Setting
Description
CNVi Mode
This option configures Connectivity
[Auto Detection] means that if Discrete solution is
discovered it will be enabled by default. Otherwise
Integrated solution (CNVi) will be enabled;
[Disable Integrated] disables integrated solution.
CNVi Mode
This option configures Connectivity
[Auto Detection] means that if Discrete solution is
discovered it will be enabled by default. Otherwise
integrated solution (CNVi) will be enabled; [Disable
Integrated] disables integrated solution.
MfUart1 type
This is a test option which allows configuration of
UART type for WiFi side band communication.
Options are ISH Uart0, SerialIO Uart2, Uart over
external pads, Not connected.
CoExistence
Manager
CoEx Manager mitigates radio coexistence issues
between Intel WWAN (modem) and Intel WLAN
(WiFi/BT). This should be enabled only if both WWAN
and WLAN solutions are based on Intel components.
WWAN Enable
Enables/Disables M.2 WWAN module. WWAN can
only be enabled for re-work board.
Discrete Bluetooth
Module
SerialIo UART0 needs to be enabled to select BT
Module
Advanced
settings
Configure ACPI objects for wireless devices
Содержание IB995
