14
FWA8800 User Manual
2.1.4
IPMI Module Installation / Replacement
If you need to install an IPMI module, remove the system lid firstly and then
follow the instructions below.
Note:
IPMI module is optional for purchase.
1. Locate the IPMI slot and align the key of the module with that on the slot.
2. Insert the module slantwise and gently push the module straight down
until the clips of the slot close to hold the module in place when the
module touches the bottom of the slot.
.
To remove the module, press the clips outwards with your thumb and index
finger of both hands.
