FWA5104 Series User
’s Manual
Device power-up delays
Maximum time the device will take before it properly
Reports itself to the host controller.
‘
Auto
’
uses default value: for a Root port it is 100 ms,
For a Hub port the delay is taken form Hub descriptor.
NCT5523D Super IO Configuration
Aptio Setup Utility
– Copyright © 2015 American Megatrends, Inc.
Main
Advanced
Chipset
Boot
Security
Save & Exit
NCT5523D Super IO Configuration
→ ←
Select Screen
↑↓
Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save
ESC: Exit
NCT5523D Super IO Chip
NCT5523D
► Serial Port 0 Configuration
► Serial Port 1 Configuration
Power-on after power failure
[power on]
Serial Port 0 Configuration
Set parameters of Serial Port 0 (COMA)
Serial Port 1 Configuration
Set parameters of Serial Port 1 (COMB)
NCT5523D H/W Monitor
Aptio Setup Utility
– Copyright © 2015 American Megatrends, Inc.
Main
Advanced
Chipset
Boot
Security
Save & Exit
PC Health Status
→ ←
Select Screen
↑↓
Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save
ESC: Exit
Smart Fan Mode Configuration
Smart Fan Function
[Disabled]
SYS Temp
:+40.5 C
CPU Temp
:+44.0 C
Fan Speed
:0 RPM
VCORE
:+0.856 V
Memory Voltage
:+1.504 V
Temperatures/Voltages
These fields are the parameters of the hardware monitoring function feature of the board. The values are read-only values as
monitored by the system and show the PC health status.
Smart Fan Function
This field enables or disables the smart fan feature. At a certain temperature, the fan starts turning. Once the temperature drops
to a certain level, it stops turning again.
Serial Port Console Redirection
Aptio Setup Utility
– Copyright © 2015 American Megatrends, Inc.
Main
Advanced
Chipset
Boot
Security
Save & Exit
→ ←
Select Screen
↑↓
Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save
ESC: Exit
COM0
Console Redirection
[Disabled]
► Console Redirection Settings
Serial Port for out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection
[Disabled]
► Console Redirection Settings
Console Redirection
Console Redirection Enable or Disable