12
CMI203 System Family User Manual
2.1 Essential Installations Before You Begin
2.1.1
Memory Installation
If you need to install or replace a memory module, disassemble the device
cover first and then follow the instructions below for installation.
1.
Loosen 6 screws from the device cover and remove the cover.
2.
Press the ejector tab of the memory slot down and outwards with your
fingertips.
3.
Hold the memory module and align the key of the module with that on the
memory slot.
4.
Gently push the module in an upright position until the ejector tabs of the
memory slot close to hold the module in place when the module touches
the bottom of the slot.
To remove the module, press the ejector tabs outwards with your fingertips to
eject the module.
