IBASE Technology AGS103T Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 82

IBASE Technology AGS103T Скачать руководство пользователя страница 20

12

AGS103T User Manual

2.1.2

Mini-PCIe & M.2 Cards Installation / Replacement

After removing the bottom cover, follow the instructions below.

1. Locate the mini-PCIe or M.2 slot, align the key of the card to the interface,

and insert the card slantwise.

Mini-PCIe card:

M.2 card:

2. Push the card down and fix it with the supplied 2 flat head screws for the

mini-PCIe card and with one screw for M.2 card.

Mini-PCIe card:

M.2 card:

2.1.3

WiFi / 3G / 4G Antenna Installation

Thread the WiFi / 3G / 4G antenna extension cable through an antenna hole of
the front I/O cover and fasten the antenna as shown below. Then apply
adhesive to the edge of the hex nut behind the front I/O cover to prevent the
extension cable from falling if the cable becomes loose.

1. Thread and fasten the hex nut and the

washer. Then install the antenna.

2. Apply adhesive around here.

Info:

The diameter of the nut is around 6.35 mm (0.25”-36UNC).

«
...
18
19
20
21
22
...
»

Содержание AGS103T



















































































Отзывы:

Нет отзывов