3
Step3: When charging, red indicator light is on. It takes about 3 hours to charge the battery
full;
Step4: When charging has completed, the red indicator light will switch off.
Warning:
1. The battery is recycled.
2. Do not dispose of the battery in fire, as it may cause Explosion.
Basic operation
1. Switching on/off the headset
Remark:
The headset will switch off automatically if no devices can be connected after 25
minutes in order to save power.
2. Pairing the headset with Bluetooth mobile phone
You have to pair the Bluetooth headset with Bluetooth mobile phone before first time use of the
headset. Please make sure your mobile phone has bluetooth function that is available. Specific
pairing procedures may vary with different mobile phones. Please refer to your mobile phone
user manual for further information.
The steps are as follows:
1. Keep the headset and Bluetooth mobile phone within 1 meter when pairing.
2. Make sure your headset is off.
3. Press and hold MFB until the indicator light flashes blue and red alternately. The headset
entered into pairing mode
4. Switch on Bluetooth function of mobile phone and search the Bluetooth device. After
searched, select ―iBall-BTM72‖ in the Bluetooth device list.
5. According to indication, enter password or PIN No:‖0000‖, and press the key of ‖ Yes‖ or
―confirm‖
6. A
fter successful pairing, select ―iBall-BTM72‖ in the Bluetooth device list, and press,
―connect‖. After successful connecting, the indicator light will flash twice every 4
seconds.
FUNCTION
OPERATION
LED
INDICATOR
LIGHT
INDICATION
TONE
Switch
on
the headset
In the OFF mode, press and hold MFB
until you hear a short beep and
indicator light flashes blue, then the
headset will enter into STANDBY
mode.
Blue indicator light is
on for 1 second
A Short beep
Switch
off
the headset
In the ON mode, press and hold MFB
until you hear a short beep and
indicator light turns off, then the
headset will enter into OFF mode.
Red indicator light is
on for 1 second and
then all indicator lights
are off
A Short beep
Enter
into
pairing
mode
When the headset is off, Press and
hold MFB until the indicator light
flashes blue and red alternately.
Red and blue LEDs
flash alternately
Nothing
Содержание BTM72
Страница 1: ......