PPPoE:
If your wireless ISPs supports PPPoE, you should choose this type. In this condition,
you should fill both the User Name and Password that your ISP provides.
Static IP
：
In this type, you should manually fill in the
IP address
,
Subnet Mask
,
Default
Gateway
, and
DNS
IP address, which are specified by your ISP. The Sixth Step:
Connection status
After you finished related configuration, and you wish to check if settings is succeed or not, please go
to “
Status
” page for more details.
4.2
WISP:
Please refer to “Setup Wizard” for details
4.3 Access Point
Check “Operation Mode”→“
Access Point
（
AP
）
”, you’ll see in below image.
In this page you may set wireless access point as per your requirement, after that click
“
Apply
” to save
settings and restart device.
Select one you wish to enable its SSID, click ”
Enable
”. Once you enable BSSID, you
could select one Channel and configure specified wireless parameter based the BSSID,
also you could enable multiple SSID option.
