iBall Andi5h Quadro, Руководство пользователя

Страница: 10 / 45

.4.
2.2 Installing the SIM card, battery, and storage card
You need to remove the back cover before you can install the SIM card and battery. Also, make sure to always turn off the power
before installing or replacing the SIM card and battery.
To remove the back cover
1. Make sure your device is turned off.
2. Firmly hold the device with both hands and the front panel facing down.
3. Push the back cover up with your thumbs until it disengages from the device and then Andi5h Quadro it up to remove.
To install the SIM card
The SIM card contains your phone number, service details, and phonebook/ message memory. Your device is supported both 2G
and 3G (WCDMA) SIM cards.
1. Remove the battery if it is installed.
2. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out the
card slot.
3. Andi5h Quadro the SIM card completely into the slot.
Note:
• The phone can support double SIM cards but 1st SIM card can use 3G networks only.
If you need to use 3G operation, please insert 3G card in the card slot 1(Default SIM1 card, defined in the menu
Settings/More…/Mobile networks/3G service), the SIM2 card will be supported 2G network only (If insert 3G card in the card slot 2,
you can also use 2G operation only).
• Some legacy SIM cards may not function with your device. You should consult with your service provider for a replacement SIM
card. There may be fees for this service.
To install the battery
Your device comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-specified original batteries and
accessories. Battery performance depends on many factors, including network configuration, signal strength, and usage patterns.
Warning: To reduce risk of fire or burns:
• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire or water.
• Do not expose to temperatures above 60°C (140°F).
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local regulations.
1. Align the battery’s exposed copper contacts with the battery connectors at the bottom part of the battery compartment.
2. Insert the contacts side of the battery first and then gently push the battery into place.