iB-WUA300N
300M Wireless-N USB Adapter
4
Chapter 2 Installation Guide
2.1 Hardware Installation
There are two ways to install the Adapter:
1. Plug the Adapter directly to the USB port on your computer.
2. Connect the Adapter and your computer through the USB cable attached in package.
The LED will light up when the Adapter is installed successfully and the PC is on.
2.2 Software Installation
2.2.1 Overview
The Adapter’s Setup Wizard will guide you through the Installation process. The Setup Wizard will
install the Wireless Utility and drivers.
When you install the hardware before installing the software, the system will prompt “Found New
Hardware Wizard”. Click
Cancel
, and run the Setup Wizard program on the CD-ROM.
The Setup steps for Windows operation Systems are very similar. The User Guide takes the
Windows XP for example to explain the installation.
2.2.2 Software Installation for Windows XP
Step 1:
Insert the Resource CD into your CD-ROM drive, and open the folder with the same
name as your product. Then double-click
Setup.exe
in the proper folder to start the
installation, and Figure 2-1 will appear. You can click
Cancel
to end the installation in the
screen. Otherwise, the installation will continue.
