iBall Baton DWA-N150 Series, Руководство пользователя

Страница: 27 / 84

24
Field Description
Method
Connection
Type
You can choose Continuous , Connect on Demand , or
Manual .
Idle Time (s) If choose Connect on Demand , you need to enter the
idle timeout time. Within the preset minutes, if the router
does not detect the flow of the user continuously, the
router automatically disconnects the PPPoE connection.
Bridge You can select Bridged Ethernet , Bridged PPPoE , or
Disable Bridge .
AC-Name The accessed equipment type.
Service-Name The service name.
VLAN
You can select Disable or Enable . After enable it, you
need to enter the VLAN ID. The value ranges from 1 to
4095.
MTU Maximum Transmission Unit. Sometimes you must
modify this function to access network successfully.
Static If this function is disabled, the modem obtains an IP
address assigned by an uplink equipment such as BAS,
through PPPoE dial-up. If this function is enabled, the
modem uses this IP address as the WAN IP address.
Source Mac
address The MAC address you want to clone.
MACCLONE Click it to enable the MAC Clone function with the MAC
address that is configured.
After finishing setting, click the
Apply Changes button to save the settings.
Auto PVC
Choose Network Setup > WAN > Auto PVC , the page shown in the following figure
appears. This page is used to configure PVC auto detect function, you can add or delete
auto-pvc.