IB RUBINETTERIE ELIO EO392, Инструкция по монтажу

Страница: 3 / 8

EN
TECHNICAL DATA
Minimum dynamic pressure:_________________________________________________________0.5 bar
Maximum operational pressure:________________________________________________________5 bar
Recommended operational pressure:_________________________________________________1-5 bar
It’s recommended to use a pressure reducer in case of
static pressure superior than 5 bar inside the waterpipe.
Maximum hot water temperature:_______________________________________________________80°C
INSTALLATION, MAINTENANCE AND PRELIMINARY CHECKING PROCEDURE
In order to get your device work correctly and fine in time, must ensure compliance with the
mode of installation and maintenance described in this booklet. Relying on a qualified plumber.
Make sure that the system is free from all debris and impurities existing.
INSTALLATION
Fig. 1: Drill a hole in the worktop (MIN Ø35 mm - 1.37 in, MAX Ø38 mm - 1.5 in). Insert the rod
of the spout, placing the gasket under it. Secure the spout with the appropriate fixing kit.
Fig. 2: Make two holes for the handles on the worktop (MIN Ø30 mm - 1.18 in, MAX Ø34 mm -
1.33 in). Mount the fixing set on the base. Insert the base into the hole from under the worktop.
Screw the upper rosette inserting the gasket. Make sure the rosette is fully screwed. Secure
everything with the appropriate fixing kit.
Fig. 3: Engage the adapter on the broach and tighten the screw.
Fig. 4: Insert the handle on the adapter and screw the grubscrew to ensure correct fastening.
Insert the hole cover plug.
Fig. 5: Screw the hose onto the rod of the spout.
Fig. 6: Screw the hose to the base, inserting the gasket.
After connecting the body to the system, turn on the stopcocks and check that the mixer tap
unit operates correctly. Keep the tap pressurised for a few minutes checking eventual leaks.
CLEANING
In order to obtain a correct cleanliness, exclusively wash them with soap and water, rewash and
dry them with a soft towel and deerskin. Avoid the usage of alcohol, solvents, solid or liquid
detergents which contain corrosive or acidic substances, abrasive sponges, swab with metallic
strings because they could irreversibly compromise the surfaces.
THE USAGE OF THIS KIND OF DETERGNETS DURING THE CLEANING OF THE MIXER EXCLUDE
IB RUBINETTERIE FROM ANY WARRANTY OBLIGATION.