4
Pairing
The IASUS Stealth uses standard Bluetooth 4.0 protocols. When paired with newer
devices, there is no need to enter a passcode. For older Bluetooth equipped devices, the
code is “0000”. The device name is “Stealth Headset”.
Pairing Second Device
The Stealth allows for pairing with two Bluetooth enabled devices at the same time,
such as another smart phone, GPS, mp3 player, etc.
To pair a second device, after the Stealth is paired with the first device, hold the primary
button for 3 seconds to get into pairing mode to pair with the second device. (Doing this
will disconnect the Stealth from the first device) Go to your first device’s Bluetooth
settings and manually connect it back to the Stealth.
Phone Use
Once paired for standard communication with a mobile device, the primary button is
used to answer/end a phone call. The two buttons underneath the “wing blade” are for
and ‐. Once pressed and released, a beep confirms the change in volume.
Volume During Music Playback and Calling
During music playback, the Stealth’s volume level is independent of the phone’s
Bluetooth volume. During a phone call, they are linked. This is normal in both Acoustic
Coil and Helmet Speaker/3.5mm configurations. If you experience low volume during
music playback, be sure the volume is turned up on your phone as well as on the
Stealth.
For example, when adjusting the Stealth’s volume during music playback, the phone’s
Bluetooth volume is not affected. However, during a phone call, adjusting the Stealth’s
volume affects the phone’s Bluetooth volume as well.
