3
iArmor
®
Customer Support: [email protected]
Rev. 20200401
STEP 4
Install the Assembled Passenger Front Mounting Bracket on
the vehicle, (Fig 5).
STEP 3
Assemble Passenger Front Mounting Bracket (PFM) and Pas-
senger Front Support Bracket (PFS) with (1) M8X1.25-25 Hex
Bolt, (2) M8 Flat Washers, (1) M8 Lock Washer and (1) M8
Hex Nut, (Fig 4). Don’t tighten hardware.
(
Fig 2) Passenger Side Center Mounting
Location
Front
Pair of holes on pinch weld
Threaded hole on
floor panel
(
Fig 3) Passenger Side Rear Mounting
Location
Pair of holes on pinch weld
Threaded hole on
floor panel
PFM
PFS
(1) M8X1.25-25 Hex Bolt
(2) M8 Flat Washers
(1) M8 Lock Washer
(1) M8 Hex Nut
(Fig 4) Passenger Front
Mounting Bracket
Assembly
STEP 5
Assemble the Passenger Side Center Mounting Bracket
(PCM) and Passenger side Center Support Bracket (PCS)
and Passenger Center Mounting Plate (PCB), (Fig 6). Don’t
tighten hardware.
(
2) M6X1-25 Hex Bolts
(
4) M6 Flat Washers
(
2) M6 Nylon Lock Nuts
(
Fig 5) Passenger Front Mounting Bracket
Installed
(
1) M8X1.25-35 Hex Bolt
(
1) M8 Lock Washer
(
1) M8 Flat Washer