5
iArmor
®
Customer Support: info@iarmorauto.com
Rev. 20200401
STEP 10
Once all (4) Brackets have been installed, attach the Assem-
bled Passenger Side Step Bar to the Brackets using (4) M6X1
-20 T-Bolts, (4) M6X1-20 Square Head Bolts (8) M6 Flat
Washers and (8) M6X1 Nylon Lock Nuts, (Fig 8). Do not tight-
en hardware at this time.
STEP 11
Level and adjust the Step Bar as necessary and fully tighten
all hardware.
STEP 12
Repeat Steps 2—11 for Driver/left side running board instal-
lation.
STEP 13
Do periodic inspections to the installation to make sure that
all hardware is secure and tight.
Attention
In order to protect your bars/boards, please use only
mild soap/non-abrasive products for cleaning.
Front
PFM
PCM1
PCM2
PRM
(2) M6X1-20 T-Bolts
(2) M6 Flat Washers
(2) M6X1 Nylon Lock Nuts
(2) M6X1-20 Square Head-Bolt
(2) M6 Flat Washer
(2) M6X1 Nylon Lock Nut
(Fig 8) Passenger Side Step Bar Installed