iArmor
®
Customer Support: [email protected]
Rev. 20210901
3
STEP 4
STEP 5
Repeat
STEPS 2-4
for Driver Side Center Brackets assembly
and installation,
(Fig 4)
. Do not fully tighten hardware at this
time.
(Fig 2) Driver Side Front Brackets Assembly
(Fig 3) Driver Center Mounting Bracket Installation
Next, attach the Assembled Driver Front Mounting Bracket
(DFM/PCM)
to the (2) factory studs with (2) M8 Hex Flange
Nuts,
(Fig 3)
. Do not fully tighten hardware at this time.
(Fig 4) Driver Side Center Brackets Assembly
DRS
DRM
PFB/DCB
PFM/DCM
(2) M8 Hex Flange Nuts
(2) M8X1.25-20mm Inner Hex Bolts
DFB/PCB
DFM/PCM
(2) M8 Hex
Flange Nuts
DFB/PCB
DFM/PCM
Front
Front
Front
Front
(Fig 5) Driver Side Rear Brackets Assembly
(1) M8X1.25-25mm Hex Bolt
(2) M8 Flat Washers
(1) M8 Lock Washer
(1) M8 Hex Nut
(2) M8 Hex Flange Nuts
(2) M8X1.25-20mm Inner Hex Bolts
STEP 3
Select (1) Driver Front Mounting Bracket
(DFM/PCM)
and (1)
Driver Front Bar Bracket
(DFB/PCB).
Attach the Bar Bracket to
the Mounting Bracket with (2) M8 Hex Flange Nuts and (2)
M8X1.25-20mm Inner Hex Bolts,
(Fig 2)
. Do not fully tighten
hardware at this time.
STEP 6
Assemble (1) Driver Rear Mounting Bracket
(DRM)
and (1)
Driver Rear Support Bracket
(DRS)
with (1) M8X1.25-25mm
Hex Bolt, (1) M8 Lock Washers, (2) M8 Flat Washers and (1)
M8 Hex Nut,
(Fig 5)
. Repeat
STEPS 2-3
for driver side assem-
bled rear brackets installation. Do not fully tighten hardware at
this time.
