IAME Parilla Reedster 125cc, Руководство по капитальному ремонту, Страница: 22 / 42

MAN-052 20
2.
CRANKCASE ASSEMBLY
- LUBRICATE THE CRANKSHAFT SEATS,
BALL BEARINGS, BIG END CAGE BEFORE
ASSEMBLING
(vedi Fig.6).
- ALSO LUBRICATE THE INNER BALANCE
SHAFT BEARING.
- INSTALL CRANKSHAFT
THE CRANKSHAFT MUST BE IN SAME
POSITION AS IN ORIGINAL INSTALLATION
(see Fig.7).
ATTENTION:
AS FIRST STEP ASSEMBLE CRANKCASE
WITH 4 SCREWS AND CHECK CRANKSHAFT
AXIAL PLAY TO BE 0.20 - 0.25mm.
IF PLAY IS LOWER OR HIGHER
DISASSEMBLE CRANKCASE, EXTRACT
BEARINGS AND USE DIFFERENT STEEL
SHIMS (0.10/0.15/0.20) TO RECOVER PLAY.
SHIMS MUST BE EQUALLY POSITIONED
(see Fig.8).
BEFORE FINAL ASSEMBLING OF
CRANKCASE HALVES CLEAN AND
DEGREASE CONTACT SURFACES AND
APPLY FLUID GASKET (Motorseal or
equivalent) ON CRANKCASE HALVES. CLEAN
EVENTUAL EXCESS OF PRODUCT FROM
THE CONTACT SURFACES (see Fig.9).
Fig.6
Fig.7
Fig.8
Fig.9