IN
TE
LL
IG
E
N
T
S
O
LU
TI
O
N
S
Operation with the PC Software or Teaching Pendant
As an example, we will set
50mm
as Position No. 1 and move the actuator to this position.
Action
Action
Action
Action
Action
Action1
Action2
Run the software
1. Using the PC Software
j
k
l
m
n
o
Click "Edit Position Data" button
Click > , then OK buttons
Move the cursor to Position No. 1
Input 50.00 and hit the "Enter" key
Other data, such as speed and acceleration are
automatically input with their default values.
Click "Send to Controller" button
Click "Move" button
All data in the Position Table is sent to the controller.
The actuator will move 50mm to Position No. 1.
Use the "Stop" button to stop movement. During
power start-up, the actuator will return to its Home
before moving 50mm to Position No. 1.
"Edit Position Data" button
"Stop" button
"Continuous Move" button
"Move" button
"Send to Controller" button
Содержание ROBO Cylinder RCP2 Series
Страница 4: ......
