IAG I14DES, Инструкция по установке и эксплуатации

Страница: 12 / 35

QUICK REFERENCE GUIDE EN
Programme Table
Programme number
1 2 Reference* 3 4 5
Programme name
Cleaning temperature
Degree of Soiling Suitable for removing the
remnants on the soiled
dishes that will be kept
waiting in the machine for
a few days, and thus, for
preventing the bad odor
buildup.
Suitable for dishes that are
not pre-cleaned but washed
immediately.
Daily washing program at which
heavily soiled dishes are cleaned
in the fastest way.
Most economical washing program
for the normally soiled daily dishes
that are kept waiting.
Determines the soiling degree of the
dishes and sets the temperature and
amount of the washing water as well
as the washing time automatically.
Suitable for all types of dishes.
- Few Medium High High
Detergents
A=25 cm³/15 cm³ B=5 cm³
- A A+B A+B A
Programme sequence
(without options)
Pre-wash
▼
End
Pre-wash
▼
Wash
▼
Cold rinse
▼
Hot Rinse
▼
Dry
▼
End
Pre-wash
▼
Wash
▼
Cold rinse
▼
Hot Rinse
▼
Dry
▼
End
Wash
▼
Cold rinse
▼
Hot Rinse
▼
Dry
▼
End
The programme sequence is
adjusted to the amount of soiling
Duration (min)
15 136 60 136 78-156
Water (I)
4,00 13,9 10,2 14,8 10,4-14,0
Energy (kWh)
- 0,74 1,24 1,45 0,90-1,45
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.
* Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme.
! Attention: Please read the operating manual prior to operating the machine for the first time.
Starting your machine
• Open the tap.
• Plug in to the socket.
• Open the door of the dishwasher.
• Place the dishes in accordance with the instructions in the user
manual.
• Make sure that the upper and lower impellers rotate freely.
• Put sufficient amount of detergent in the detergent dispenser
and close its lid.
•
Make sure that indicators on programme display are
illuminated by pressing On / Off button.
• Check if the Rinse Aid indicators light and add rinse aid if
needed.
• You may use Half Load / Tablet Detergent Button and Time
Delay button features as necessary.
• Refer to "Table of Programme Data and Average Consumption
Values" to select a suitable programme.
• Select the desired programme with Programme Selection
button.
•
Press Start / Pause / Cancel button to start the programme.
Pay attention not to open the door of the machine when it is
running. If you need to open the door, safety system will stop
your machine. There may be a rush of vapour when you open
the door of your machine; be careful. The programme will
resume running when you close the door.
• When the programme you have selected comes to an end, an
audible warning signal with intervals of 8 seconds will warn you
to turn off your machine. This audible signal will warn you 10
times before it turns off.
• Press On / Off button to turn off your machine.
• Indicator lights on the programme display will turn off.
• Unplug the machine from the socket.
Leave your dishes in the machine for about 15 minutes after
they are washed in order to have them cooled down. Your
dishes will dry in a shorter time if you leave the door of your
machine ajar during this period. This will increase the drying
effectiveness of your machine.
- 45°C 60°C 70°C 40°C - 65°C
Auto
Pre-wash Eco Quick Intensive
Half Load indicator
On/Off button
1
2
5
6
7
8
9
10
11
12
3
4
Start/Cancel indicator
Time Delay indicator
Remaining Time Indicator/
Delay Time Indicator
Combi Tablet indicator
Programme indicator
Half Load/Combi Tablet button
Rinse aid level indicator light
Programme selection button
Start/Cancel button
Time Delay button