4
WAIT
while player boots up
→
once you see “Basic settings” on screen,
the unit is ready for content update or menu
configuration
5
PLUG IN
a USB mouse to the unit’s USB port
6
Enter
the corresponding configuration option
by moving the mouse
cursor over the configuration and click on the option to enter
→
(Wireless model only) Using the USB mouse, click on “Wireless LAN”
to enter Wireless configuration and provide security information to
connect to your wireless access point
→
find and set the correct time/date AND time zone
.
IMPORTANT
: time zone must be set correctly in the menu or via
management software for scheduled playback
→
(OPTIONAL)
Set a Password
in the menus to prevent unauthorized
changes.
IMPORTANT
: Password will be asked while enter the setup menu
during playback
7
Click
Set content
button to configure your signage appliance to the
content service if needed
→
For advanced player configuration, such as static IP, display
resolution, and firmware update, visit
www.digisignage.com
for more
information
